Cable Management

18 Excel Electric - Cable Management C A B L E M A N A G E M E N T S Y S T E M S EZ-FIT CABLE TRAY & ACCESSORIES Classification of trays varies as light, medium and high duty. The system is interconnected using locking screws and serrated nuts. To ensure continuity these should be tightened on site to torque values. Safe Edge Part ID LSN’s Integral Coupler Features • Returned Safe-Edge Bodies • Integral Couplers & Fish Plate • Only 2 Fastenings needed for Quick Coupling • Possibility to Torque Guarantees Electrical Continuity • Part Number ID Specifications • Manufactured to I.S. EN 61537:2007 • Material Hot Dip Galvanised to EN 10346:2015 • High LEED Certification Rating Benefits • Competitive Price, High Quality • Ex-Factory Service • Quick Install Design • Specials Available • BIM Drawings Available • Made and Stocked in Ireland Specifications 6.1 Metallic System component 6.2 Non-Flame propagating 6.3 According to electrical continuity Characteristics: 6.4 CTS with electrical continuity; Max linear Imp. 1.00 M.ohm per metre Continuity tests carried out by independent test centre 6.5 Resistance against corrosion according to class 4 Table 1 6.6 Temperature tested : Table 2 Min. (Storage) -25 o C Table 3 Max +15 o C Table 2 Min (Installation) +15 o C Table 3 +15 o C Table 3 Min (Application) +30 o C Table 3 +40 o C 6.7 Perforation base area Classification Class B 2% - 15% 6.9 Impact tested to 2.0J CTS without insulating characteristic 7.1 Marking: All parts are indelibly engraved with identification 9.1 Construction: All bodies are produced with returned ‘safe’ edges 9.3 Mechanical connections. The system is interconnected using locking screws and serrated nuts. To ensure continuity these should be tightened on site to torque values. Material: EN 10327 Grade DX5 1D Z275; Continuously hot-dip zinc coated low carbon steel sheet. System manufactured to EN.61537:2007. Classification (Section 6) as follows:

RkJQdWJsaXNoZXIy Mzk5MjA=